The portable LED light strip uses a 5V USB power supply to add a lot of personalized mood in the dark and relieve your eye strain.
Everyone's ergonomic design brings cutting and easy adjustment to the length you want without any waste or damage.
Advanced adhesive tape with excellent viscosity. Install quickly and easily in seconds
16 color options - Multi-color: white, red, green, blue, yellow, pink, purple, etc. Use a bright LED to customize the workspace to set the mood and illuminate the hardware
Powered by any device that has an output 5V 1A USB port
Flex the strip to the desired position - adhere to almost any surface with adhesive
High-brightness LEDs can last for 100,000 hours
Low power consumption, super bright but low temperature operation.
All the light is scattered, completely smooth and very uniform.
Adhesive self-adhesive back, safe and easy to use.
High quality 5050 SMD LEDs for high strength and reliability for long life.
DIY home lights are corridors, stairs, trails, windows, lit up with colorful home life
Flexible belt for bending and bending
Architectural decorative lighting, boutique ambient lighting
Festivals, events, exhibition lights
Suitable for car and bicycle decoration, border or contour lighting
1. Cutting (as needed): Cut the cut marks (white lines) on the strip to the desired length.
2. Peel: Remove the adhesive backing from the strip.
3. Firmly press the strip at the desired location and connect the USB to the USB port.
You can turn the controller on/off by pressing the speed/bright button for about 3 seconds.
1. Clean the dust and make sure there is no dust on the back of the TV before installation to avoid falling.
2. For a small part of the usb port, the TV power supply cannot reach 1A / 2A. When the LED light bar is inserted into the TV usb port, it sometimes cannot be turned on or blinks. You can simply use the 5V 1A / 2A Universal USB Wall Charger as the LED light bar. powered by.
The matte back cannot be firmly adhered to it.
24-key infrared remote control. (There is no button on the USB cable.)
Type: 24 button remote control
Connection method: ordinary anode (+)
Output: 5-24V (3x2A)
Working temperature: -20 ° C -60 ° C
Remote control battery 3V: 1xCR2025 (including battery)
Brightness + (8 total) brightness - (8 in total) OFF ON
Static red static green static blue static white
Static Orange Static Pea Green Static Dark Orchid 7 Color Jumping Change
Static dark yellow static cyan static magenta all faded out and fade in
Static yellow static light blue static pink 7 color fade change
Static straw yellow static sky blue static purple 3 base color jump
LED type: 5050 SMD
Light color: RGB
PCB color: white
Number of LEDs: 30 smd / m
Waterproof rating: not waterproof
Working voltage: DC 5V
Angle of view: 120°
Working temperature: -20 to 50 ° C
Belt length: 79in
USB cable length:39in
Quantity: 1 set
For manual measurements, please allow 0.04-0.12in error. Please make sure you don't mind before bidding
Due to differences between the different displays, the image may not reflect the actual color of the project. Thank you!
1 Pc x strip light
1 remote control
1 Pc x USB cable with LED controller
If you are unsatisfied with your item for any reason, return it within 30 days of delivery.